Indoor Water Feature
Commissioned to build an indoor water feature for the Cosmetic department in Harrods Store in London. The feature wraps around one of the building pillars and has two mirror polished, stainless steel water walls.
Acrylic Water Wall
A 2.3 metre tall by 1.6 metre wide Acrylic water wall, built as the back drop to the stage of a chapel. Supplied complete with a matching lectern. Both items feature the chapels logo and ‘welcome’ message cut into the surface of the Acrylic.
Acrylic Water Wall
A 2.3 metre tall by 1.6 metre wide Acrylic water wall, built as the back drop to the stage of a chapel. Supplied complete with a matching lectern. Both items feature the chapels logo and ‘welcome’ message cut into the surface of the Acrylic.
Stainless Steel Water Walls
A 2.5 metre tall by 1.5 metre wide toughened glass and stainless steel water walls, built as the back drop to an exhibition stand. Both items feature the company logo.
Spa Entrance
These two features grace the old course Spa entrance. An Acrylic feature stands on top of a stone plinth which stands within a mirror polished reservoir and lit through the stone with fibre optic lighting, connected to a colour changer. This gives a calming, ever changing colour wash to the whole area.
Water Wall
This water wall was built to disguise a structural column within the spa area of this liner, the feature is shown on test and is fabricated from mirror polished stainless steel. A major problem we had to overcome, was to ensure all four sides of the water wall ran equally, even when the ship was pitching in heavy seas.
Fabrication Drawing
Drawing showing detail of fabrication required for this water wall, which was built to disguise a structural column within the spa area of this liner, the feature is shown on test and is fabricated from mirror polished stainless steel. A major problem we had to overcome, was to ensure all four sides of the water wall ran equally, even when the ship was pitching in heavy seas.
Water Feature
A 7.6 metre high by 2 metre wide water feature, built to run from the ground floor up through the ceiling and finishing at the first floor roof level inside this up market restaurant. The feature has been designed to allow the water to run down both sides.
Water Feature
A 7.6 metre high by 2 metre wide water feature, built to run from the ground floor up through the ceiling and finishing at the first floor roof level inside this up market restaurant.
Free Standing Feature
A 1.5 meter high free standing feature for the spa entrance, 1 metre diameter base section, cloaked in slate and trimmed with Oak, this supports a 60cm Acrylic sphere through which the water passes and runs over. The sphere is lit by LED’s which can be set to one colour, or programmed to auto change.